Go!Control Panel
2 way voice control panel with touch screen and built in GSM radio gives you the easiest way to protect your entire home.0
 |
Group:Control
Use: Connects all peripherals to the monitoring company. Takes user input. Provides feedback.
Nessesity Rating: 5 out of 5
Qnt:
This device is required. It controls the entire alarm system. |
Go!Control Panel
Color touch-screen interface
Intuitive, user-friendly interface is found on the Go!Control panel, your computer (internet) and web-enabled phone – providing your customers with access when and where they need it.
GSM (cellular) radio
The most reliable communication option available in the industry. No more concern with cut phone lines or the elimination of residential phone lines altogether.
Integrated two-way voice
Go!Control allows the central station to listen in and talk to the homeowner when a signal is received.
Built-in Z-Wave RF Protocol
Customers can now control lighting, HVAC, and other Z-Wave appliances in the home right from the panel, web-enabled phone, or the internet. No need for extra hardware—it’s all contained within the Go!Control panel. And this is just the beginning! Numerous money- and time-saving applications are currently being developed for 2gig's Go!Control system.
- Color Touch Screen Display
- Fully Self Contained
- Snap-in GSM Radio
- Remotely Control Panel Settings
- Two-way Voice Over cellular
- Over-the-air Update Functionality
- Built-in Z-Wave Home Control
- Customer Messaging Capable
- 48 Wireless Zones
- 2 Hardwire Zones
- Weather Information Display
- 24-hour Backup Battery
- 8 Usercodes
- Quick Arm/Exit
4-Button Key Ring Remote
4-Button Keychain Touch Pads provide convenient, portable system control with ultimate security.0
 |
Group:Control
Use: Send arm, disarm and panic signals to the control panel from 30 ft away.
Nessesity Rating: 3.5 out of 5
Qnt:
This device is not necessary but is very useful for arming and disarming your system from the outside. Can also be used to send signal duress in the case you are attacked while entering your home. |
4-Button Key Ring Remote
The key fob enables you to turn the 2GIG alarm system on and off before entering the home or after exiting. If there is an emergency, you can turn on the siren and automatically call the central monitoring station. The key fob is a lithium coin battery-powered, wireless key fob designed to fit on a keychain, in a pocket, or in a purse.
FEATURES:- Arms system in STAY or AWAY mode
- Disarms system
- Auxiliary output and emergency functions
- Lithium coin battery with 5 years life
Wireless Keypad
The touch pad is a wireless pad that gives you control of your alarm system anywhere you need it.0
 |
Group:Control
Use: Send user input and receive feedback from the control panel
Nessesity Rating: 2 out of 5
Qnt:
Most homes will not use this peripheral unless you have a side entrance you often use or an upstairs bedroom. |
Wireless Keypad
Wireless KeypadWireless Keypad with stay and away arming options as well as fire and panic emergency functions
FEATURES:- Arms system in STAY or AWAY mode
- Disarms system
- Fire and Panic emergency functions
- Lithium coin batteries with 5 years life
Door/Window Contacts
Protects anything that opens or closes, such as doors, windows, jewelry cases and gun cabinets.0
 |
Group:Intrusion
Use: Protects anything that opens or closes, such as doors, windows, jewelry cases and gun cabinets.
Nessesity Rating: 4.5 out of 5
Qnt:
This device is required on all exterior door to be considered a burglar alarm |
Door/Window Contacts
Can be installed on doors, windows, and many other objects that open and close. The sensor transmits signals to the control panel when a magnet mounted near the sensor is moved away from or closer to the sensor. The sensor has an external input that accepts N/C dry contact devices. The sensor is also equipped with a cover tamper for additional security.
FEATURES:
- Magnet Dimensions: 1.3 x 0.435 x 0.312 in.
- Sensor Dimensions: 2.59 x 1.03 x 0.49 in.
- Fully supervised
- Lithium batteries with 5 years life
- Reed sensitivity: 0.625 in. minimum gap, 0.85 in. typical
- Tamper protected
PIR Motion Detector
Detects movement inside a structure.Passive infrared detection.
2 Sensitivity settings.
0
 |
Group:Intrusion
Use: Detects movement of body heat within a structure.
Nessesity Rating: 4 out of 5
Qnt:
It is highly recommended that you use at least 1 PIR motion detector or glass break sensor with your burglar alarm system. |
PIR Motion Detector
Passive Infrared Motion Detector is a wall-mounted unit with wide angle motion protection. When set to High Sensitivity Mode, the PIR has a maximum range of 30 ft. deep x 50 ft. wide. The PIR is pet immune up to 55 lbs.
FEATURES:- Dual element sensor with 30 ft. by 50 ft. range
- 33 or 55 lb. pet immune
- 90-degree look down
- Lithium battery with 5 years life
- 110? spread
- 3 different mounting brackets
- Tamper protected
- Fully supervised
Glass Break Detector
15' radius range protects entire area with 1 sensor.Recognizes the actual audio pattern of glass breaking.
0
 |
Group:Intrusion
Use: Detects the sound of breaking glass in a 15ft radius
Nessesity Rating: 4 out of 5
Qnt:
It is highly recommended that you use at least 1 glass break sensor or PIR motion detector with your burglar alarm system. |
Glass Break Detector
The 2GIG-GB1-345 Glass Break Detector is a fully supervised, tamper-protected, ceiling or wall mounted unit with 15 ft. maximum detection range, 360° maximum horizontal sensing angle, and dual-stage glass break detection.
Senses the sound of variety of glass (tampered, wired, laminate, ordinary plate, etc.).
FEATURES:- Monitors for the sound of breaking glass
- Two test LEDs
- Dual shatter recognition technology
- Lithium batteries with 5 years life
- 360? range
- Tamper protected
- Fully supervised
Heat/Smoke Detector
Detection of both smoke and fixed/rate of rise heat and works with photolytic chamber to catch fires faster.0
 |
Group:Safety
Use: Detects raising heat and smoke
Nessesity Rating: 4 out of 5
Qnt:
This device is by far the most important extra peripheral. Not only will it alert you about a fire but it will also alert the fire department. |
Heat/Smoke Detector
The TX Series supervised wireless smoke alarms are self-diagnostic and include an integrated Learn Mode 319.5MHz crystal transmitter. Features of the TX Series wireless smoke alarms include photoelectric technology, integral Temp 3 sounder, automatic drift compensation, replaceable optical chamber, low battery annunciation, status/sensitivity reading LED, mounting base tamper, and integrated fixed temp./ROR heat sensor. The TX Series wireless smoke alarms can be used with selected GE Security control panels, such as Simon and Concord and make the perfect fire/life safety add-on to a monitored security system.
FEATURES:- Self-Diagnostics reduces the chance of a nuisance alarm
- Replaceable optical chamber make cleaning a snap
- 2 3V Lithium batteries provide long battery life
- Automatic drift compensation reduces the chance of a nuisance alarm
- Learn mode feature reduces installation time
- Alarm signal sent to central station on test
- Low battery pre-alert sent to central station before sounder chirps
- Mounting base tamper sends trouble condition if smoke alarm is removed reducing liability.
Medical/Panic Button Remote
Providing access to 24hr emergency alarm for panic or medical emergencies0
 |
Group:Safety
Use: Wearable pendant to send a duress or medical emergency signal
Nessesity Rating: 2 out of 5
Qnt:
This device is suggested for elderly incase of a medical emergency or fall and for individuals concerned about home invasion, domestic violence or have filed TPOs. |
Medical/Panic Button Remote
Transmits emergency signal to the alarm system whether the system is armed or disarmed. Small and lightweight enough to be placed in a shirt pocket or purse. Comes with wristband, lanyard, car-visor clip, or belt clip or permanent mounting bracket. Press and hold the button for 2 seconds the LED will light up to confirm a signal has been sent. NOTE: Signals will not be received if the button is not within range of the control panel.
FEATURES:- For triggering emergency alarm
- Dimensions: 1.65 x 1.20 x 0.50 in. (LxWxH)
- Weight: 0.45 oz. (including battery)
- 5-second button lockout
- Lithium battery with 3 years life
- Completely water resistant
- Completely supervisable
- Mounting options: Lanyard, wristband, wall mount, belt clip, car-visor clip
ZStat Thermostat
Gives you control over your HVAC system though the control panel or mobile apps0
 |
Group:Misc
Use: Wirelessly control your from your Go!Control Panel or the free mobile ap for the Blackberry or iPhone
Nessesity Rating: 3 out of 5
Qnt:
Not needed but very useful. Be able to completely control your A/C and save money while you are home or away |
ZStat Thermostat
2 RTM-1 radio ports allows your thermostat to communicate with the alarm system as well as other systems. In some area programs may be available to connect your thermostat to power grid status. This can make it easy for you to moderate your energy use at peak hours and use power when it is less expensive.
FEATURES:- Z-Wave Programmable Thermostat
- 5-1-1 day programmable
- Large, easy-to-read LED backlit display
- Large, easy-to-read LED backlit display
- Runs on 3 AAA batteries and/or HVAC power
- Thin, sleek design
- Simplified installation
Super Switch TAKE
Convert 8 hardwired zones into eight wireless zones and works with existing 12-volt control panels.0
 |
Group:Misc
Use: convert 8 hardwired zones into 8 wireless zones
Nessesity Rating: 2 out of 5
Qnt:
Use for existing hardwire systems. Any hardwired contacts can be converted. |
Super Switch TAKE
The 2GIG-TAKE-345 Super Switch is 2GIG’s wireless takeover module. This unit was designed to convert 8 hardwired zones into eight wireless zones, make installation simple, and work with existing 12-volt control panels. The module is to be mounted next to the existing control box where the hardwired zones are connected. All of the zones on the Super Switch act as supervised wireless zones. NOTE: If the control panel has been removed then a 12-volt power supply with battery backup is required
FEATURES:
- Converts hardwire zones to wireless frequency
- Converts 8 zones per module (additional modules may be added)
- Integrates with 12-Volt panels
- Easily connects to existing control panel’s battery
- Provides power backup through existing hardwire panel